Attending a hearing
Hearings can be held in person, by videoconference, in a hybrid format or in the absence of the parties (file hearing).
See the table below for more information about specific hearings. You can also contact us at 613-993-3595 or citt-tcce@tribunal.gc.ca to obtain further information on a case’s hearing schedule.
Final injury inquiry hearings
| Final injury inquiry | Date of hearing | Product definition |
|---|---|---|
| NQ-2025-001 | July 14, 2025 | Corrosion resistant flat-rolled steel sheet products of carbon steel including products alloyed with the following elements: Boron (B) not more than 0.01%, Niobium (Nb) not more than 0.100%, Titanium (Ti) not more than 0.08%, or Vanadium (V) not more than 0.300% in coils or cut lengths, in thicknesses up to 0.168 in. (4.267 mm) and widths up to 72 inch (1,828.8 mm) with all dimensions being plus or minus allowable tolerances contained in the applicable standards, with or without passivation and/or anti-fingerprint treatments, originating in or exported from the Republic of Türkiye by Borçelik Çelik Sanayi Ticaret A.Ş. |
| NQ-2025-002 | September 15, 2025 | Polyethylene terephthalate (“PET”) resin having an intrinsic viscosity of at least 0.70 deciliters per gram but not more than 0.88 deciliters per gram, including PET resin that contains various additives introduced in the manufacturing process, as well as blends of virgin PET resin and recycled PET, originating in or exported from the People’s Republic of China and the Islamic Republic of Pakistan, excluding 100% recycled PET resin. |
Expiry review hearings
| Expiry review | Date of hearing | Product definition |
|---|---|---|
| RR-2024-007 | July 21, 2025 | Aluminum extrusions produced via an extrusion process of alloys having metallic elements falling within the alloy designations published by The Aluminum Association commencing with 1, 2, 3, 5, 6 or 7 (or proprietary or other certifying body equivalents), with the finish being as extruded (mill), mechanical, anodized or painted or otherwise coated, whether or not worked, having a wall thickness greater than 0.5 mm, with a maximum weight per metre of 22 kilograms and a profile or cross-section which fits within a circle having a diameter of 254 mm, excluding the products described in the appendix to the Tribunal’s order made on January 13, 2020, in expiry review RR-2018-008, originating in or exported from the People’s Republic of China. |
| RR-2024-008 | October 6, 2025 | Hot-rolled carbon steel plate and high-strength low-alloy steel plate, not further manufactured than hot-rolled, heat-treated or not, in cut lengths, in widths from 24 inches (+/-610 mm) to 152 inches (+/-3,860 mm) inclusive, and thicknesses from 0.187 inches (+/-4.75 mm) up to and including 3.0 inches (76.2 mm) (with all dimensions being plus or minus allowable tolerances contained in the applicable standards), but excluding plate for use in the manufacture of pipe and tube (also known as skelp); plate in coil form, plate having a rolled, raised figure at regular intervals on the surface (also known as floor plate), originating in or exported from the Federative Republic of Brazil, the Kingdom of Denmark, the Republic of Indonesia, the Italian Republic, Japan and the Republic of Korea (excluding goods exported from South Korea by Hyundai Steel Company). |
| RR-2025-001 | January 5, 2026 | Certain carbon steel fasteners originating in or exported from the People’s Republic of China and the Separate Customs Territory of Taiwan, Penghu, Kinmen and Matsu (Chinese Taipei) and the subsidizing of such products originating in or exported from the People’s Republic of China. |